TL;DR
Tucci Hot Rods unveiled a 2022 Ford Maverick fitted with a twin-turbo 5.0-liter Coyote V8 at the 2026 SEMA show. The conversion required major changes to the truck’s transmission, suspension, steering, subframe and exhaust; the reported setup is rated for up to 1,200 horsepower, though that figure is a stated capability, not a confirmed output measured in testing.
Tucci Hot Rods unveiled a 2022 Ford Maverick powered by a twin-turbo 5.0-liter Coyote V8 at the 2026 SEMA show, presenting a major engine-swap project that required extensive changes to the compact truck’s chassis and drivetrain. The shop’s reported setup is capable of producing up to 1,200 horsepower, although the available report does not say that output was measured in testing.
Get business pricing on garage and car supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
The V8 is paired with two Hellion 62-millimeter turbos, along with a revised intake manifold, oil pan and fuel rails. Custom 3D-printed components route the exhaust through the Maverick’s front fender vents. The engine connects to a ZF 8HP70 eight-speed automatic using an adapter plate from LOJ Conversions.
The transmission sends power through a custom driveshaft to a rear end from an S550-generation Mustang. Tucci retained the Maverick’s factory rear suspension but modified the front subframe and fitted custom lower control arms, along with an S197 Mustang steering rack and steering knuckles. The shop moved the steering rack to clear the engine and cut part of the rear crossmember, according to the source report.
Tucci used 3D scanning to work out the lower-control-arm geometry, drawing on the shop’s experience with digital fabrication. The build’s horsepower figure describes what the setup is said to be capable of; the report provides no dyno results, road-test figures or other independent measurement of the truck’s output.
The Engineering Behind the Swap
The project shows how far a compact pickup can be altered when builders are willing to redesign systems around a much larger and more powerful engine. This was not a simple engine replacement: fitting the V8 meant adapting the front suspension and steering, creating a new path for exhaust and power delivery, and modifying the truck’s structure for clearance.
For Maverick owners and custom-build shops, the truck is a high-profile example of the model’s potential as a platform for fabrication. It is not evidence that a Coyote swap is a straightforward or affordable option for ordinary owners. The extensive custom work, specialized components and reported structural changes make this a purpose-built show vehicle, rather than a bolt-in modification.
Products Worth Considering

Chemical Guys 10-Piece Car Wash Kit with Foam Gun

NOCO Boost GBX155 4250A UltraSafe Jump Starter, 12V Lithium Battery Booster

Chemical Guys 16-Piece Ceramic Car Wash and Protection Kit with Big Mouth Foam Cannon
As an affiliate, we earn on qualifying purchases.
From Early Maverick Build to V8
Tucci Hot Rods, based in upstate New York, was among the shops Ford worked with on Maverick builds in 2021, the truck’s launch year. Its earlier project used the 2.0-liter EcoBoost engine and 3D-printed parts to create a street-truck look. Ford later cited that build as one of the inspirations for the Maverick Lobo, according to The Drive’s report.
The shop has now returned to that project truck with a different goal: replacing its original powertrain with a Coyote V8. Owner Dave Tucci told Ford Muscle that the idea began as a joke after the first build and eventually became a real plan. The new Maverick keeps some factory components, including the rear suspension, while using Mustang parts and custom-fabricated pieces elsewhere.
“When we originally built the truck in 2021 for Ford, it was a pre-production vehicle. The build went over really well, and afterward, we joked that we should Coyote-swap it. Eventually, that joke turned into a real plan.”
— Dave Tucci, owner of Tucci Hot Rods, speaking to Ford Muscle
Power Figures and Road Use
The source report does not provide a dyno sheet or verified horsepower measurement, so the stated capacity of up to 1,200 horsepower should not be read as a confirmed output. It also does not give details on the truck’s weight, performance testing, fuel requirements, reliability, cost or whether the build is intended for regular road use.
The report describes the modifications but does not explain how the truck’s braking system, cooling capacity, emissions compliance or long-term durability were addressed. It is also unclear whether Tucci plans to offer a kit or repeat the conversion for customers. The project’s appearance at SEMA confirms the build was presented there; it does not establish that the configuration is suitable for ordinary use without further engineering and testing.
Whether the Build Goes Further
The next useful details would be verified dyno and driving results, along with information from Tucci about the build’s intended use and any plans for customer conversions. The available report does not announce a production kit, sale or follow-up testing schedule. Until the shop releases more information, the Maverick is best understood as a custom SEMA project demonstrating what extensive fabrication can achieve.
Key Questions
What engine is in the modified Maverick?
Tucci Hot Rods fitted the 2022 truck with a 5.0-liter Ford Coyote V8 and two Hellion 62-millimeter turbochargers.
How much power does the twin-turbo setup make?
The source report says the setup is capable of up to 1,200 horsepower. It does not include dyno results confirming that the truck produced that amount.
What major changes were needed to fit the engine?
The conversion used a different transmission and rear end, a modified front subframe, custom lower control arms and Mustang steering components. Tucci also moved the steering rack, altered the rear crossmember and fabricated exhaust routing through the front fender vents.
Can Maverick owners buy this as a kit?
The report does not say that Tucci plans to sell a kit or offer the conversion to customers. The project is described as a heavily customized build.
Source: thedrive.com
