For most home garages, I’d start with the BIG RED 4-Ton Low-Profile Hydraulic Floor Jack: its listed capacity gives truck owners more headroom than the 3-ton options without jumping straight to the largest models. The YELLOW JACKET 5-Ton Low-Profile suits buyers who prioritize higher stated capacity, while the Antlevix 3-Ton with Dual-Piston Pump is a candidate for owners who value quicker lifting on compatible vehicles. Choosing a heavy-duty floor jack for trucks means balancing rated capacity, minimum saddle height, lifting range, jack weight, and clearance under your truck. A higher capacity can add bulk, and a low-profile design does not automatically provide enough lift for every truck. Read on for the full comparison and guidance on matching a jack to your vehicle and workspace.
Get business pricing on garage and car supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
Complete the kit
Key Takeaways
- Capacity choices are split: the lineup includes 3-, 4-, and 5-ton models, so the right pick depends on vehicle weight and the manufacturer’s stated lifting points—not the truck label alone.
- Four-ton models offer a middle ground: the BIG RED, YELLOW JACKET, AV Steel, and Jack Boss options sit between the more maneuverable 3-ton class and the heavier-duty 5-ton choices.
- Dual-piston pumps are a recurring feature: Antlevix, SATA, Maxority, and Jack Boss variants list this design, making pump configuration a useful comparison point rather than a capacity substitute.
- Low-profile construction appears across several capacities: buyers still need to check the jack’s minimum height against their truck’s actual clearance, especially with lowered vehicles or flat tires.
- There are repeated models in the supplied lineup: the YELLOW JACKET 5-Ton Low-Profile appears twice, so compare the exact listing details before treating those entries as different choices.
| BIG RED 4-Ton Low-Profile Hydraulic Floor Jack |  | Best Overall for Truck Owners | Capacity: 4 tons (8,000 lb) | Lifting range: 3-7/8 to 20 in | Pump: Dual-piston quick-lift | VIEW ON AMAZON | See Our Full Breakdown |
| Antlevix 3-Ton Low-Profile Hydraulic Floor Jack with Dual-Piston Pump |  | Best for Low-Clearance Light Trucks | Load capacity: 6,600 lb (3 tons) | Minimum height: 2.9 in | Maximum lifting height: 19.8 in | VIEW ON AMAZON | See Our Full Breakdown |
| YELLOW JACKET Low-Profile Hydraulic Floor Jack, 4-Ton Capacity |  | Best for Storage-Conscious 4-Ton Buyers | Capacity: 4 tons (8,800 lb) | Minimum lifting height: 4-5/16 in | Maximum lifting height: 19-7/8 in | VIEW ON AMAZON | See Our Full Breakdown |
| YELLOW JACKET 5-Ton Low-Profile Hydraulic Floor Jack |  | Best for Maximum Stated Capacity | Lifting capacity: 5 tons (10,000 lb) | Type: Low-profile hydraulic floor jack | Pump: Dual-piston | VIEW ON AMAZON | See Our Full Breakdown |
| Maxority 3-Ton Low-Profile Hydraulic Steel Floor Jack |  | Best for Extended-Reach Access | Capacity: 3 tons (6,600 lb) | Type: Hydraulic floor jack | Material: High-strength steel | VIEW ON AMAZON | See Our Full Breakdown |
| AV Steel Heavy-Duty 4-Ton Hydraulic Floor Jack |  | Best for Standard Pickups and SUVs | Capacity: 4 tons (8,000 lbs) | Lift range: 4-1/4 to 19-3/4 inches | Weight: 87.3 lbs | VIEW ON AMAZON | See Our Full Breakdown |
| SATA 3-Ton Heavy-Duty Steel Floor Jack with Dual-Piston Pump |  | Best for Controlled Lowering | Capacity: 3 tons | Overload test capacity: 4.5 tons (9,900 lb) | Lifting range: 3-3/4 to 19-1/8 inches | VIEW ON AMAZON | See Our Full Breakdown |
| Jack Boss 3-Ton Low-Profile Aluminum and Steel Racing Floor Jack |  | Best for Maneuverability | Capacity: 3 tons (6,600 lbs) | Tested capacity: 4.5 tons (9,900 lbs) | Lifting range: 3-15/16 to 18-5/16 inches | VIEW ON AMAZON | See Our Full Breakdown |
| AV Steel 3-Ton Low-Profile Hydraulic Floor Jack |  | Best for Low-Clearance Access | Capacity: 3 tons (6,600 lbs) | Lifting range: 3-1/8 to 19-7/8 inches | Dimensions: 29-1/8 × 13-3/4 × 5-7/8 inches | VIEW ON AMAZON | See Our Full Breakdown |
| YELLOW JACKET 5-Ton Low-Profile Hydraulic Floor Jack |  | Best for Higher Rated Capacity | Load capacity: 5 tons (10,000 lbs) | Model: AS332L | Pump: Dual-piston quick-lift | VIEW ON AMAZON | See Our Full Breakdown |
| Maxority 5-Ton Low-Profile Hydraulic Steel Floor Jack with Dual-Piston Quick-Lift Pump |  | Best for Maximum Truck Capacity | Lifting capacity: 5 tons (11,000 lbs) | Construction: Heavy-duty steel | Pump: Dual-piston quick-lift | VIEW ON AMAZON | See Our Full Breakdown |
| Jack Boss 4 Ton Low Profile Hydraulic Floor Jack with Dual Piston Quick Lift Pump |  | Best for Low-Clearance Trucks | Capacity: 4 tons (8,800 lbs) | Lifting range: 3.9–20 inches | Pump type: Dual-piston quick-lift | VIEW ON AMAZON | See Our Full Breakdown |
| AUTOWN 3 Ton Floor Jack, Alloy Steel Hydraulic Car Jack with Quick Lift & Cross-Shape Rubber Pad, 7.1-20.9 Inch Lifting Range for SUV Truck (6600 lbs) |  | Best for Higher Lift Reach | Capacity: 3 tons (6,600 lbs) | Lifting range: 7.1–20.9 inches | Material: Alloy steel | VIEW ON AMAZON | See Our Full Breakdown |
| heavy duty floor jack for truck | Pump | Capacity | Material | Warranty |
|---|---|---|---|---|
| BIG RED 4-Ton Low-Profile Hydr | Dual-piston quick-lift | 4 tons (8,000 lb) | High-strength steel | Limited 1-year manufacturer warranty |
| Antlevix 3-Ton Low-Profile Hyd | Dual-piston | — | Alloy steel | 90-day limited warranty |
| YELLOW JACKET Low-Profile Hydr | — | 4 tons (8,800 lb) | Heavy-duty steel | — |
| YELLOW JACKET 5-Ton Low-Profil | Dual-piston | — | High-strength steel | 1 year |
| Maxority 3-Ton Low-Profile Hyd | Dual-piston rapid-pump system | 3 tons (6,600 lb) | High-strength steel | — |
| AV Steel Heavy-Duty 4-Ton Hydr | Dual piston | 4 tons (8,000 lbs) | — | 12 months |
| SATA 3-Ton Heavy-Duty Steel Fl | Dual-piston rapid lift | 3 tons | — | — |
| Jack Boss 3-Ton Low-Profile Al | Dual-piston | 3 tons (6,600 lbs) | Aluminum body and welded steel frame | — |
| AV Steel 3-Ton Low-Profile Hyd | Dual-piston | 3 tons (6,600 lbs) | Steel | 1 year |
| YELLOW JACKET 5-Ton Low-Profil | Dual-piston quick-lift | — | Alloy steel | 1 year |
| Maxority 5-Ton Low-Profile Hyd | Dual-piston quick-lift | — | — | 90 days |
| Jack Boss 4 Ton Low Profile Hy | — | 4 tons (8,800 lbs) | — | — |
| AUTOWN 3 Ton Floor Jack | — | 3 tons (6,600 lbs) | Alloy steel | — |
More Details on Our Top Picks
BIG RED 4-Ton Low-Profile Hydraulic Floor Jack
I’d put the BIG RED 4-Ton near the top for truck owners who want substantial capacity without giving up access under lower vehicles. Its 8,000-pound rating exceeds the Antlevix 3-Ton’s 6,600-pound capacity, while the 3-7/8-inch minimum height still suits many cars and SUVs. The dual-piston pump cuts down on pumping to reach a load, and the wide stance with swivel casters is useful when positioning the jack in a busy garage. It also lists overload protection and ASME safety compliance, details not specified for every option here. The tradeoff is that this is a steel jack, not a lightweight carry-along, and its 20-inch maximum lift may not cover every high-clearance truck setup. I’d check the truck’s lift points and required height before choosing it.
Pros:- 8,000-pound capacity provides more headroom than the 3-ton Antlevix.
- 3-7/8-inch minimum height fits many low-clearance vehicles.
- Dual-piston pump raises loads with fewer strokes.
- Wide stance, swivel casters, overload protection, and stated ASME compliance support controlled garage use.
Cons:- Steel construction can make it cumbersome to move or transport.
- Maximum lift is 20 inches, which may be short for some truck service needs.
- A limited one-year warranty is shorter than some buyers may want for a shop tool.
Best for: Truck and SUV owners who want an 8,000-pound-capacity garage jack with a low starting height and documented safety features.
Not ideal for: Drivers who need a jack that is easy to transport frequently or who require more than 20 inches of lift.
- Capacity:4 tons (8,000 lb)
- Lifting range:3-7/8 to 20 in
- Pump:Dual-piston quick-lift
- Material:High-strength steel
- Casters:2 steel casters and 2 360-degree swivel casters
- Safety:Overload protection; meets ASME safety standards
- Warranty:Limited 1-year manufacturer warranty
Our verdict“Choose the BIG RED if you want a versatile 4-ton jack for mixed truck, SUV, and car work and can manage its steel build.”
Antlevix 3-Ton Low-Profile Hydraulic Floor Jack with Dual-Piston Pump
The Antlevix 3-Ton is the low-entry option in this group: its 2.9-inch minimum height sits below the BIG RED’s 3-7/8-inch starting point, helping when a vehicle’s clearance is the main obstacle. Its 6,600-pound rating suits many light trucks, SUVs, and cars, but gives less capacity margin than the 4-ton BIG RED or YELLOW JACKET. A dual-piston pump means fewer strokes as the jack rises, and the listed 19.8-inch maximum height is useful for routine home-garage work. The drawbacks are practical rather than subtle: at 62 pounds, it is not a convenient choice for frequent hauling, and its 90-day limited warranty is notably short. I’d choose it for access and everyday light-truck service, not as the capacity-first pick for heavier trucks.
Pros:- 2.9-inch minimum height is the lowest specified in this five-product group.
- 6,600-pound capacity covers many light trucks and SUVs.
- Dual-piston pump reduces the number of strokes needed to raise a load.
- Specified maximum height of 19.8 inches helps buyers check fit against service needs.
Cons:- Capacity is lower than the 4-ton BIG RED and YELLOW JACKET models.
- At 62 pounds, it can be awkward to carry or reposition often.
- The 90-day limited warranty is short.
Best for: Home mechanics with a low-clearance light truck, SUV, or car who prioritize a very low entry height over extra capacity.
Not ideal for: Owners of heavier trucks who want capacity above 6,600 pounds, or buyers who need a portable jack or longer warranty coverage.
- Load capacity:6,600 lb (3 tons)
- Minimum height:2.9 in
- Maximum lifting height:19.8 in
- Weight:62 lb
- Material:Alloy steel
- Pump:Dual-piston
- Dimensions:26.77 x 13.39 x 6.69 in
- Warranty:90-day limited warranty
Our verdict“Pick the Antlevix for a low-clearance light truck or SUV when its 6,600-pound rating is sufficient and portability is secondary.”
YELLOW JACKET Low-Profile Hydraulic Floor Jack, 4-Ton Capacity
The YELLOW JACKET 4-Ton pairs an 8,800-pound stated capacity with a detachable handle, giving it a useful storage advantage over the BIG RED, whose handle is not listed as detachable. That feature can make it easier to put away in a crowded garage, though it does not make the steel jack light to move. Its 4-5/16-inch minimum height is higher than both the BIG RED and Antlevix, so I’d be more cautious about fit under lowered vehicles. The dual pumps and overload protection support faster lifting and add a safety measure, while the large load-contact surface provides a broad point of contact. Unlike the BIG RED, the listing does not provide a warranty or caster details, and assembly is required. This is a capacity-focused garage choice, not the best pick for the lowest access point.
Pros:- 8,800-pound stated capacity is higher than the BIG RED’s 8,000-pound rating.
- Detachable handle makes storage more convenient.
- Dual pumps reduce pumping effort compared with a single-pump design.
- Overload protection and a large load-contact surface support controlled lifting.
Cons:- 4-5/16-inch minimum height is higher than the BIG RED and Antlevix.
- Heavy-duty steel construction may be cumbersome to reposition.
- Assembly is required, and the provided data does not state a warranty or caster configuration.
Best for: Truck and SUV owners who want a 4-ton-capacity steel jack with a detachable handle for more compact garage storage.
Not ideal for: Owners of lowered vehicles or trucks with tight lift-point clearance, and buyers who need clearly specified casters or warranty terms.
- Capacity:4 tons (8,800 lb)
- Minimum lifting height:4-5/16 in
- Maximum lifting height:19-7/8 in
- Material:Heavy-duty steel
- Pumps:Dual
- Safety feature:Overload protection
- Handle:Detachable
Our verdict“Choose this YELLOW JACKET if you want 4-ton capacity and a removable handle, but verify that its 4-5/16-inch entry height clears your truck.”
YELLOW JACKET 5-Ton Low-Profile Hydraulic Floor Jack
For buyers who rank capacity above documented fit details, the YELLOW JACKET 5-Ton has the strongest stated rating in this set at 10,000 pounds. That gives it more rated capacity than the 4-ton BIG RED and 4-ton YELLOW JACKET, making it the capacity-first choice for heavier truck and SUV maintenance. Its dual-piston pump supports faster lifting, while the long ergonomic handle offers leverage and the rubber-padded anti-slip saddle helps hold contact at the lift point. The catch is that the provided specifications omit the lifting range, so I can’t compare its minimum clearance or maximum height with the BIG RED’s known 3-7/8-to-20-inch range. It is also built from high-strength steel, which may make moving it a chore. I’d confirm both vehicle fit and lifting range before buying.
Pros:- 10,000-pound capacity is the highest stated rating in this five-product group.
- Dual-piston pump speeds lifting compared with a single-piston design.
- Long handle provides leverage and control during operation.
- Rubber-padded anti-slip saddle and overload safety valve add contact and overload safeguards.
Cons:- No lifting-range dimensions are provided, making vehicle-fit checks harder.
- Heavy-duty steel construction may be difficult to move around a garage.
- The listing does not specify caster details.
Best for: Truck and SUV owners who want the highest stated capacity among these five options and can verify the jack’s dimensions before purchase.
Not ideal for: Buyers who need a confirmed minimum height, maximum lift, or an easy-to-carry jack.
- Lifting capacity:5 tons (10,000 lb)
- Type:Low-profile hydraulic floor jack
- Pump:Dual-piston
- Material:High-strength steel
- Safety features:Overload safety valve; anti-slip saddle with rubber padding
- Model number:AS332HN
- Warranty:1 year
Our verdict“Choose this model when its 10,000-pound rating is your priority, provided you confirm its height range fits your truck.”
Maxority 3-Ton Low-Profile Hydraulic Steel Floor Jack
The Maxority 3-Ton is aimed at buyers who need a low-profile, extended-reach layout more than a higher capacity rating. Its dual-piston rapid-pump system cuts down on strokes, and the built-in overload safety valve adds a stated safeguard. Against the Antlevix, it shares the 6,600-pound class but provides less usable comparison data: the Maxority listing gives no minimum or maximum lift dimensions, while Antlevix specifies 2.9 to 19.8 inches. That makes the Antlevix easier to match to a particular vehicle, even though the Maxority’s extended-reach design may suit lift points set farther beneath a vehicle. Steel construction favors a sturdy garage tool over easy transport. The random color selection is a minor inconvenience; the bigger limitation is the missing maximum height. I’d verify reach and lift range before relying on it for truck work.
Pros:- Low-profile, extended-reach design is intended to reach under vehicles and toward distant lift points.
- 6,600-pound capacity suits many cars, SUVs, and light trucks.
- Dual-piston rapid-pump system reduces the strokes needed to raise a load.
- Built-in overload safety valve provides a stated safeguard.
Cons:- Maximum lift height and minimum height are not provided.
- Capacity is below the 4-ton and 5-ton options in this group.
- Color is selected at random.
Best for: Home mechanics with a 6,600-pound-or-lighter vehicle whose lift points benefit from an extended-reach jack design.
Not ideal for: Truck owners who need more than 6,600 pounds of capacity or require specified minimum and maximum lift heights before choosing.
- Capacity:3 tons (6,600 lb)
- Type:Hydraulic floor jack
- Material:High-strength steel
- Design:Low-profile, extended reach
- Pump:Dual-piston rapid-pump system
- Safety feature:Built-in overload safety valve
- Color:Random
Our verdict“Choose the Maxority for extended-reach access on a suitable light truck or SUV, but only after confirming its lift range meets your needs.”
AV Steel Heavy-Duty 4-Ton Hydraulic Floor Jack
For a truck owner who wants more stated capacity than a 3-ton jack without stepping up to a 5-ton model, this 4-ton steel jack is a middle-ground choice. Its 19-3/4-inch maximum lift gives useful working height for many standard pickups and SUVs, and the dual-piston pump is designed to reduce handle strokes. Compared with the SATA 3-Ton, it offers an extra ton of rated capacity; unlike the YELLOW JACKET 5-Ton, its listed vehicle guidance is limited to standard cars, SUVs, vans, and pickups rather than a broader heavy-duty claim. The tradeoff is real: at 87.3 pounds, moving it around a home garage takes effort, and its 4-1/4-inch minimum height rules it out for some low-clearance vehicles. It is not recommended for lifted vehicles, RVs, sports cars, or heavy commercial trucks.
Pros:- 4-ton capacity provides more rated headroom than the 3-ton SATA and AV Steel models.
- Dual-piston pump is designed to reduce handle strokes during lifting.
- 19-3/4-inch maximum lift suits many standard pickup and SUV service tasks.
- Overload valve, rotating saddle, and rear rotating wheels support controlled positioning.
Cons:- At 87.3 pounds, it is cumbersome to carry or move frequently.
- The 4-1/4-inch minimum height may not fit vehicles with low ground clearance.
- Not recommended for lifted vehicles, RVs, sports cars, or heavy commercial trucks.
Best for: Owners of standard pickups or SUVs who want a steel jack rated above 3 tons and have enough room to store and reposition a heavy tool.
Not ideal for: Owners of lifted or low-clearance vehicles, RVs, and heavy commercial trucks; the stated fit guidance excludes these uses, and the 4-1/4-inch minimum height may not clear lower vehicles.
- Capacity:4 tons (8,000 lbs)
- Lift range:4-1/4 to 19-3/4 inches
- Weight:87.3 lbs
- Construction:Heavy-duty steel
- Pump:Dual piston
- Safety:Built-in overload protection valve
- Saddle:360° rotatable
- Warranty:12 months
Our verdict“Choose this jack for a standard pickup or SUV when 4-ton capacity matters more than easy portability or very low entry clearance.”
SATA 3-Ton Heavy-Duty Steel Floor Jack with Dual-Piston Pump
The SATA makes the most sense for truck owners who value a slow-release lowering system as much as lifting capacity. Its 3-ton rating suits many light trucks and SUVs, while the dual-piston pump is designed to cut pumping effort. Compared with the 4-ton AV Steel, it gives up a ton of rated capacity but starts lower, at 3-3/4 inches; that can help with some lower vehicles, though it still may not fit every low-clearance car. The overload valve and controlled descent give it a more safety-focused profile than a jack described mainly around capacity, such as the YELLOW JACKET 5-Ton. The main compromise is that this is still a heavy-duty steel tool, so storage and repositioning may be less convenient, and buyers looking for extra capacity for heavier vehicles should look elsewhere.
Pros:- Slow-release system supports controlled lowering.
- Dual-piston pump is designed to reduce handle effort and lift time.
- 3-3/4-inch minimum height is lower than the AV Steel 4-ton jack’s stated entry height.
- Steel construction and overload protection suit routine garage lifting.
Cons:- 3-ton capacity offers less rated headroom than the 4-ton AV Steel or 5-ton YELLOW JACKET.
- Heavy-duty steel construction can make moving and storage less convenient.
- The 3-3/4-inch minimum height will not clear every low-profile vehicle.
Best for: DIY truck and SUV owners who want a 3-ton steel jack with a specified slow-release system for more controlled lowering.
Not ideal for: Owners of heavier vehicles who need more than a 3-ton rating, or drivers whose low-clearance vehicle sits below the jack’s 3-3/4-inch minimum.
- Capacity:3 tons
- Overload test capacity:4.5 tons (9,900 lb)
- Lifting range:3-3/4 to 19-1/8 inches
- Construction:High-strength steel
- Pump:Dual-piston rapid lift
- Safety features:Overload protection valve and slow-release system
Our verdict“Pick the SATA if controlled lowering and a lower entry height matter more to your light-truck work than extra capacity.”
Jack Boss 3-Ton Low-Profile Aluminum and Steel Racing Floor Jack
This Jack Boss is the lineup’s mixed-material option: an aluminum body paired with a welded steel frame, plus swivel front casters for positioning. That combination is aimed at buyers who want easier steering around a garage than a full steel jack like the AV Steel 4-Ton, while retaining a 3-ton rating for light trucks and SUVs. Its 3-15/16-inch minimum height helps with lower vehicles, and the rubber saddle adds a protective contact surface at the lifting point. The tradeoff is capacity and lift height: it is rated for 3 tons and tops out at 18-5/16 inches, below the 19-3/4-inch AV Steel and 19-7/8-inch AV Steel 3-ton. It is better matched to light-duty truck work than heavier pickups or jobs needing extra reach.
Pros:- Aluminum body and welded steel frame combine with swivel front casters for easier maneuvering.
- 3-15/16-inch minimum height suits many vehicles with limited clearance.
- Rubber saddle helps protect the vehicle’s lifting point.
- Dual-piston pump is designed to reduce the number of handle strokes.
Cons:- 3-ton capacity provides less headroom than the 4-ton and 5-ton options in this group.
- 18-5/16-inch maximum lift is lower than both AV Steel models listed here.
- Mixed-material construction does not make it a compact tool; carrying it may still be cumbersome.
Best for: Garage owners who work on light trucks or SUVs and want a low-profile jack with swivel casters and a rubber saddle for easier positioning.
Not ideal for: Owners of heavier trucks or anyone needing greater lift height; its 3-ton rating and 18-5/16-inch maximum are lower than the AV Steel 4-ton option.
- Capacity:3 tons (6,600 lbs)
- Tested capacity:4.5 tons (9,900 lbs)
- Lifting range:3-15/16 to 18-5/16 inches
- Dimensions:28.3 × 13.7 × 7.8 inches
- Material:Aluminum body and welded steel frame
- Pump:Dual-piston
- Included components:Rubber saddle and two-piece handle
- Safety standard:ANSI/ASME PASE
Our verdict“Choose the Jack Boss for maneuverable, low-profile service on light trucks when positioning convenience matters more than capacity or maximum lift.”
AV Steel 3-Ton Low-Profile Hydraulic Floor Jack
Among these picks, the AV Steel 3-ton has the lowest stated starting height: 3-1/8 inches. That gives it an advantage over the SATA’s 3-3/4-inch entry point and the Jack Boss’s 3-15/16-inch minimum when a vehicle has limited clearance. It also reaches 19-7/8 inches, the greatest stated maximum in this group, which can provide more working room than the Jack Boss’s 18-5/16-inch ceiling. The dual-piston pump, overload protection, and rotating saddle round out a practical garage setup. Its central limitation is the 3-ton rating: truck owners who need more capacity should compare it with the AV Steel 4-Ton or YELLOW JACKET 5-ton model instead. Check the vehicle and lift-point requirements before use; a low starting height does not make it suitable for every truck.
Pros:- 3-1/8-inch minimum height is lower than the other listed jacks in this batch.
- 19-7/8-inch maximum lift exceeds the Jack Boss and SATA maximum heights.
- Dual-piston pump is designed to reduce handle strokes.
- Overload protection and a 360° rotating saddle support safer positioning.
Cons:- 3-ton capacity offers less headroom than the AV Steel 4-ton and YELLOW JACKET 5-ton.
- Vehicle and lift-point compatibility needs to be checked before purchase.
- Low-profile access alone does not make it suitable for heavier or lifted trucks.
Best for: Owners of light trucks or SUVs with low clearance who need a floor jack that starts at 3-1/8 inches and offers a relatively high maximum lift.
Not ideal for: Owners of heavy pickups who need capacity beyond 3 tons, or buyers who have not checked that the jack’s specifications match their vehicle and lifting points.
- Capacity:3 tons (6,600 lbs)
- Lifting range:3-1/8 to 19-7/8 inches
- Dimensions:29-1/8 × 13-3/4 × 5-7/8 inches
- Material:Steel
- Pump:Dual-piston
- Safety features:Overload protection; 360° rotatable saddle
- Safety standard:ANSI/ASME PASE
- Warranty:1 year
Our verdict“Choose this AV Steel when low entry clearance and a tall lift range matter more than the extra capacity of a 4- or 5-ton jack.”
YELLOW JACKET 5-Ton Low-Profile Hydraulic Floor Jack
The YELLOW JACKET stands out for its 5-ton, 10,000-pound stated capacity, the highest rating among these five products. That makes it the capacity-led choice for buyers comparing it with the 3-ton SATA, Jack Boss, and AV Steel low-profile jack, or the 4-ton AV Steel. Its alloy-steel construction, dual-piston quick-lift pump, long ergonomic handle, and rubber-padded anti-slip saddle are aimed at workshop and DIY maintenance where repeated lifting and stable contact matter. But capacity is only one part of truck fit: unlike the SATA and AV Steel 3-ton, its supplied data gives no lift range or minimum clearance. I would not choose it for a low-clearance truck without confirming those dimensions, nor treat its rating as proof that it fits a heavy commercial vehicle. The one-year warranty is specified.
Pros:- 5-ton (10,000 lb) stated capacity is higher than the other four products in this batch.
- Dual-piston quick-lift pump is designed to reduce pumping strokes.
- Rubber-padded anti-slip saddle supports contact and helps protect the vehicle surface.
- Alloy-steel construction and overload safety valve suit workshop maintenance.
Cons:- No minimum clearance or lift range is specified, making vehicle fit harder to verify.
- The capacity rating alone does not confirm suitability for heavy commercial trucks.
- The supplied data does not state dimensions or weight for storage and positioning decisions.
Best for: Truck and SUV owners prioritizing a 5-ton stated capacity who can verify the jack’s clearance and lift-height specifications before buying.
Not ideal for: Buyers who need a confirmed minimum height or maximum lift for a low-clearance or high-clearance vehicle; neither measurement is provided in the product data.
- Load capacity:5 tons (10,000 lbs)
- Model:AS332L
- Pump:Dual-piston quick-lift
- Material:Alloy steel
- Safety:Overload safety valve
- Saddle:Rubber-padded anti-slip
- Vehicle fit:Universal fit; cars, trucks, and SUVs
- Warranty:1 year
Our verdict“Pick the YELLOW JACKET for its higher stated capacity only if you can confirm its missing lift dimensions suit your truck.”
Maxority 5-Ton Low-Profile Hydraulic Steel Floor Jack with Dual-Piston Quick-Lift Pump
For buyers prioritizing lifting capacity, the Maxority’s 11,000-pound rating puts it ahead of the 4-ton Jack Boss and gives more headroom for heavier trucks and SUVs. Its dual-piston quick-lift pump is designed to reduce strokes, while the extra-long handle adds leverage when raising a vehicle. The anti-slip saddle and rubber padding support more controlled contact at the lift point, and the overload safety valve adds a layer of protection against excessive load.
The tradeoff is a 90-day warranty, shorter than many buyers may want from a substantial shop tool. Its steel construction also makes portability less of a priority than capacity. Choose this Maxority when your truck’s weight calls for greater lifting headroom; the Jack Boss is a better fit when its stated 8,800-pound capacity is sufficient and its specified 3.9-inch low starting height matters more.
Pros:- 5-ton, 11,000-pound stated capacity offers more headroom than the 4-ton Jack Boss
- Dual-piston pump is designed to reduce the number of strokes
- Extra-long handle provides added leverage
- Overload valve and padded anti-slip saddle support controlled lifting
Cons:- 90-day manufacturer warranty is limited
- No lifting range is provided in the supplied specifications
- Steel construction may be less convenient to move or store than lighter designs
Best for: Truck and SUV owners who need a 5-ton jack with added capacity headroom and plan to keep it in a home garage.
Not ideal for: Buyers who want a longer warranty or a jack with a documented low starting height; the product data lists a 90-day warranty but no lifting range.
- Lifting capacity:5 tons (11,000 lbs)
- Construction:Heavy-duty steel
- Pump:Dual-piston quick-lift
- Handle:Extra-long
- Safety features:Overload safety valve, anti-slip saddle, rubber padding
- Included component:Floor jack
- Model:MAX1901-35X
- Color:Red
- Warranty:90 days
Our verdict“Choose this Maxority for its 5-ton capacity and leverage features if the short warranty and unspecified lifting range suit your garage needs.”
Jack Boss 4 Ton Low Profile Hydraulic Floor Jack with Dual Piston Quick Lift Pump
The 3.9-inch minimum height is the Jack Boss’s clearest advantage for trucks or SUVs with low front clearance: it can reach beneath vehicles that may defeat a taller jack. Its lift range extends to 20 inches, and the dual-piston pump is specified as lifting up to five times faster than single-pump models, reducing repeated pumping during a lift. A wide stance adds stability under load, according to the supplied product details.
Its 4-ton, 8,800-pound capacity is below the 5-ton Maxority’s 11,000 pounds, so buyers of heavier trucks should compare their vehicle and lifting-point requirements carefully. Unlike the Maxority, this listing also calls out a specific low starting height, which makes the Jack Boss easier to match to low-clearance vehicles. Assembly is required before use, and the product data does not specify construction material or a warranty.
Pros:- 3.9-inch minimum height suits low-clearance vehicles
- Lifts to a stated maximum of 20 inches
- Dual-piston pump is specified as up to five times faster than single-pump models
- Wide stance is designed to add stability under load
Cons:- 4-ton capacity is lower than the 5-ton Maxority
- Assembly is required before use
- Supplied specifications do not state construction material or warranty
Best for: Owners of low-clearance pickups, cars, or SUVs who need a stated 3.9-inch starting height and can work within a 4-ton capacity.
Not ideal for: Owners of heavier trucks who need capacity beyond 8,800 pounds, or buyers who want a ready-to-use jack without assembly.
- Capacity:4 tons (8,800 lbs)
- Lifting range:3.9–20 inches
- Pump type:Dual-piston quick-lift
- Design:Low profile
- Stance:Wide stance for added stability
- Applications:Cars, trucks, and SUVs
- Color:Red
- Assembly:Required before use
Our verdict“Pick the Jack Boss when low starting clearance matters more than the extra capacity offered by the 5-ton Maxority.”
AUTOWN 3 Ton Floor Jack, Alloy Steel Hydraulic Car Jack with Quick Lift & Cross-Shape Rubber Pad, 7.1-20.9 Inch Lifting Range for SUV Truck (6600 lbs)
The AUTOWN is the choice here for buyers who value a 20.9-inch maximum lift height and a contact pad designed to grip both round and flat frame points. Its 3-ton, 6,600-pound capacity is suited to many SUVs and lighter trucks, while the cross-shaped rubber pad helps limit slipping at the lifting point. Quick-lift hydraulics and smooth-rolling casters also support easier positioning and operation around a garage.
That extra reach comes with a meaningful limit: its stated capacity sits well below the 4-ton Jack Boss and 5-ton Maxority, making it a less suitable choice for heavier trucks. The listed minimum height is 7.1 inches, so it is not the pick for low-clearance vehicles; the Jack Boss starts at 3.9 inches. The product is also described as heavy and bulky, which can complicate storage in a compact garage.
Pros:- 20.9-inch maximum lifting height offers more reach than the Jack Boss’s stated 20-inch maximum
- Cross-shaped rubber pad is designed for grip on round or flat frame points
- Alloy steel construction
- Smooth-rolling casters and quick-connect handle support moving and storage
Cons:- 3-ton capacity is lower than both the 4-ton Jack Boss and 5-ton Maxority
- 7.1-inch minimum height is unsuitable for many low-clearance vehicles
- Heavy, bulky design may be difficult to store in a small garage
Best for: SUV and lighter-truck owners with adequate ground clearance who want a jack that reaches 20.9 inches and has a shaped rubber saddle pad.
Not ideal for: Owners of heavy trucks or low-clearance vehicles; its 6,600-pound capacity is lower than the other two picks, and its 7.1-inch minimum height limits access.
- Capacity:3 tons (6,600 lbs)
- Lifting range:7.1–20.9 inches
- Material:Alloy steel
- Drive type:Hydraulic
- Pad type:Cross-shape rubber pad
- Casters:Smooth-rolling
- Lift system:Rapid lift hydraulic technology
- Handle:Quick-connect
Our verdict“Choose the AUTOWN for extra lift height and its shaped rubber pad if your vehicle fits within the 3-ton rating and clears its 7.1-inch minimum height.”
How We Picked
I compared the listed jacks on factors that change whether they suit truck work: rated capacity, minimum and maximum lifting height, construction, pump design, and stated vehicle fit. A truck jack needs more than a large capacity number; it must reach the vehicle’s lifting point, fit beneath it, and be practical to position in the intended workspace. I gave weight to products whose listed features make their role clear, while treating unprovided specifications as unknown rather than assuming they are superior.
The ranking favors a balanced combination of capacity and stated utility over capacity alone. That places the BIG RED 4-ton model in the leading all-around position, while 5-ton choices suit buyers seeking a higher rated class and 3-ton models may be more appropriate when the vehicle’s requirements and the jack’s documentation support that choice. Dual-piston pumps, aluminum-and-steel construction, and a stated lifting range help distinguish options, but none replaces checking the owner’s manual, product specifications, and safe support equipment. The duplicated YELLOW JACKET listing is treated as one model unless its exact product details differ.
| heavy duty floor jack for truck | Pump | Material |
|---|---|---|
| BIG RED 4-Ton Low-Profile Hydr | Dual-piston quick-lift | High-strength steel |
| Antlevix 3-Ton Low-Profile Hyd | Dual-piston | Alloy steel |
| YELLOW JACKET Low-Profile Hydr | — | Heavy-duty steel |
| YELLOW JACKET 5-Ton Low-Profil | Dual-piston | High-strength steel |
| Maxority 3-Ton Low-Profile Hyd | Dual-piston rapid-pump system | High-strength steel |
| AV Steel Heavy-Duty 4-Ton Hydr | Dual piston | — |
| SATA 3-Ton Heavy-Duty Steel Fl | Dual-piston rapid lift | — |
| Jack Boss 3-Ton Low-Profile Al | Dual-piston | Aluminum body and welded steel frame |
| AV Steel 3-Ton Low-Profile Hyd | Dual-piston | Steel |
| YELLOW JACKET 5-Ton Low-Profil | Dual-piston quick-lift | Alloy steel |
| Maxority 5-Ton Low-Profile Hyd | Dual-piston quick-lift | — |
| Jack Boss 4 Ton Low Profile Hy | — | — |
| AUTOWN 3 Ton Floor Jack | — | Alloy steel |
Factors to Consider When Choosing Heavy Duty Floor Jack For Trucks
Before choosing a jack, match it to the truck, the lifting points, and the jobs you plan to do. These checks can prevent a common mismatch: buying a high-capacity jack that cannot fit under the vehicle or reach the needed height.
Match Rated Capacity to the Lift, Not Just the Truck’s Total Weight
A floor jack supports only the portion of the vehicle carried at its lifting point, so the truck’s total curb weight is not the sole figure that determines suitability. Start with the vehicle manual and the jack maker’s capacity guidance, then select a rated jack that covers the intended lift with a sensible margin. Do not assume that a 5-ton rating makes a jack right for every truck; a higher-capacity unit may be larger and harder to position. Conversely, a 3-ton model is not automatically adequate because the truck weighs less than three tons. Capacity ratings also do not make a jack a safe substitute for properly rated jack stands.
Check Both Minimum and Maximum Saddle Height
Minimum height determines whether the jack can roll beneath the truck and reach the specified lift point. Maximum height determines whether it can raise that point enough for the task, including wheel removal or access for planned service. Measure the vehicle at the actual lifting location rather than relying on advertised ground clearance, which may describe a different part of the chassis. A flat tire, suspension changes, side steps, or uneven flooring can change the needed approach. Avoid choosing by the phrase low-profile alone; compare the published height range with your measurements.
Plan Around Axle Lifts and Tire Changes
Raising one corner, one axle, or an entire end of a truck can call for different lift heights and positioning space. Confirm that the vehicle manual identifies a suitable lifting point and that your jack’s saddle can contact it securely. A wide or shaped pad may help with contact, but pad design cannot correct a misplaced lift point. For work that needs the truck held aloft, lower it onto properly rated stands placed at approved support points. Never work beneath a vehicle supported only by a hydraulic jack.
Treat Pump Speed as a Convenience, Not a Capacity Upgrade
Dual-piston and quick-lift pump designs can reduce the number of strokes needed before the saddle reaches the vehicle, which matters during repeated shop work. They do not increase the jack’s safe rated capacity or change the vehicle’s approved lifting points. Check whether the product listing clearly states the pump type and lifting range rather than inferring performance from a feature name. A quicker pump may be less valuable than a jack that fits your truck and reaches the needed height. For occasional tire changes, reliable fit and controlled operation should take priority over speed claims.
Account for Weight, Storage, and Floor Conditions
Heavy steel jacks can be stable choices for a fixed garage, but moving and storing them may take more effort than handling a lighter design. Aluminum-and-steel construction may appeal to buyers who need easier transport, though you should compare the exact capacity and dimensions before deciding. A jack also needs a firm, level surface; soft ground, gravel, and sloped driveways are poor places to lift a truck. Check the product’s footprint and handle clearance against your garage layout. If you need roadside lifting, a floor jack may be awkward to carry and position compared with equipment designed for mobile use.
Budget for the Whole Safety Setup
The jack is only one part of a safe lifting setup: suitable jack stands, wheel chocks, and a stable work surface matter too. Set the stands’ capacity and height range for the vehicle and support points, and follow the vehicle and equipment instructions. Do not rely on a jack’s capacity label to justify lifting an unsupported truck. A larger jack may be worth choosing when its added capacity or lift range suits regular truck work, but it is not a reason to skip support gear. Buyers doing only occasional maintenance should prioritize a compatible, documented setup over extra features they will rarely use.
Frequently Asked Questions
Is a 3-ton floor jack enough for my truck?
It can be suitable for some truck lifts, but the label alone cannot settle the question. Check your truck’s manual for approved lifting points and the jack manufacturer’s guidance for the load at those points. Also verify that the jack fits beneath the vehicle and reaches the height needed for your task. If the documentation does not clearly support the planned lift, choose a more suitable model rather than guessing from the truck’s total weight. Use properly rated stands once the vehicle is raised.
Should I choose a 4-ton jack or move up to a 5-ton model?
Choose based on your vehicle, planned lift, and the jack’s full specifications, not on the largest number available. A 5-ton model offers a higher stated capacity class, while a 4-ton jack may be a more practical fit if its capacity and lift range meet the manufacturer’s guidance for your truck. Compare minimum height, maximum height, footprint, and jack weight alongside capacity. Extra capacity does not fix a jack that cannot reach the lifting point or fit beneath the chassis. When in doubt, confirm suitability with the vehicle and jack manufacturers.
Does a low-profile jack work on a stock-height truck?
Yes, a low-profile design can work on a stock-height truck if its height range matches the vehicle and the intended lifting point. Low profile describes how low the saddle can sit; it does not tell you how high the jack can lift or whether its shape clears nearby components. Measure the clearance at the approved lift point and compare it with the product’s published minimum height. Check maximum height as well, since a jack that fits underneath may still fall short for the job. Avoid relying on the product name in place of measurements.
Is a dual-piston pump worth choosing for occasional truck maintenance?
A dual-piston pump may reduce the number of strokes needed to bring the saddle up, which can be handy when you lift vehicles often. For occasional maintenance, fit, capacity, and a usable lift range usually matter more than pump speed. The pump design does not raise the jack’s rated capacity or make the vehicle safer to support. Compare the full specifications and confirm that the model suits your truck before paying attention to convenience features. Keep in mind that stands, wheel chocks, and safe lifting procedures remain necessary.
Can I use a floor jack to hold my truck while I work underneath it?
No. A hydraulic floor jack is for raising a vehicle, not serving as its sole support during work underneath. Once the truck reaches the required height, use properly rated jack stands at approved support points and follow the vehicle and equipment instructions. Place the setup on firm, level ground and chock the wheels that remain on the floor. Never reach beneath a vehicle supported only by a jack, even if the jack has a high capacity rating. If the surface or lifting point is uncertain, stop and get qualified guidance.
Conclusion
For an all-around starting point, I’d choose the BIG RED 4-Ton Low-Profile, with the caveat that its full height range and fit must match your truck. Buyers seeking a higher-capacity option can compare the YELLOW JACKET or Maxority 5-ton models, while the Maxority’s listed dual-piston quick-lift pump gives it a distinct convenience angle. For value-minded shoppers, I’d compare the 3- and 4-ton steel models by documented capacity, dimensions, and included features rather than assuming a lower-capacity jack is automatically a better deal. Beginners should favor the model with the clearest specifications and a straightforward fit for their vehicle, then pair it with correctly rated stands and chocks. For a lighter transport-oriented choice, the Jack Boss aluminum-and-steel 3-ton stands apart from the steel-heavy lineup; for a stated lifting range and truck-oriented pad, review the AUTOWN listing closely. Choose only after confirming your truck’s approved lift points, required height, and the jack’s specifications.
Halloween Picks
halloween
As an affiliate, we earn on qualifying purchases.
